ASI 3801-30W 30-Inch White Snap-Flange Grab Bar
The ASI 3801-30W is a 30-inch (762 mm) grab bar with 1-1/2-inch (38 mm) diameter, 18-gauge type 304 stainless steel tubing and a white epoxy powder-coated finish. Snap-on covers with locking dimples conceal the end-flange mounting hardware.
Specifications
- Bar length: 30 inches (762 mm).
- Tubing: type 304 stainless steel, 1-1/2 inches (38 mm) in diameter and 18 gauge.
- End flanges: 3-1/8 inches (79 mm) in diameter and 5/64 inch (2 mm) thick, with two 1/4-inch mounting holes on a 2-3/8-inch bolt circle.
- Snap-on covers: 21 gauge, with locking dimples.
- Exposed surfaces: white epoxy powder-coated finish.
Installation guidance
Use the bar as a template to mark and pre-drill mounting holes. ASI specifies two #10 self-tapping pan-head screws and flat washers per flange, supplied by others, or another fastener system suited to site conditions. Provide appropriate anchoring and backing before wall finishing. ASI's installation guidance places the top of the bar 33 to 36 inches above the finished floor; adequate anchoring is critical to the installed system.
