ASI 0740-Z Single Surface-Mounted Robe Hook
This single hook has a chrome-plated Zamac body and a stainless steel wall bracket. It measures 2-1/8 inches wide by 1-7/16 inches high by 2-1/8 inches deep (54 x 37 x 54 mm).
Installation and care
Surface-mount the wall bracket using the supplied #10 self-threading screws through its provided holes. Secure the hook to the bracket by tightening the stainless steel hex socket set screw at the base of the flange. Manufacturer guidance suggests a typical mounting height of 66 inches above the finished floor; for the manufacturer's 2010 ADA accessibility guidance, install at no more than 54 inches for clear-floor side reach or 48 inches for clear-floor forward reach. These recommendations do not guarantee compliance.
For routine cleaning, the manufacturer recommends a soft clean rag with mild detergent, followed by a water-moistened clean rag and then a dry rag.
