ASI 0785-Z Surface-Mounted Towel Ring
The ASI 0785-Z is a surface-mounted towel ring with a chrome-plated finish, supplied mounting hardware, and a stainless steel set screw that secures the ring to its wall bracket. Its 6-3/8-inch diameter helps buyers check fit before installation.
Specifications and installation
- Dimensions: 2-3/16 inches by 6-3/8 inches diameter by 1-5/8 inches.
- Surface-mounted; the wall bracket attaches with supplied self-threading screws.
- Secure the ring to the bracket by tightening the stainless steel slotted set screw at the bottom of the flange.
- Manufacturer’s typical mounting suggestion is 52 inches above finished floor (AFF). Its 2010 ADA installation guidance specifies a maximum of 48 inches AFF to the bracket centerline with clear floor access, or 46 inches AFF where side reach is over an obstruction. These are manufacturer installation instructions, not a blanket compliance guarantee.
For routine cleaning, the manufacturer recommends a soft cloth with mild detergent, followed by a water-moistened cloth and a dry cloth.
