ASI 0745-Z Surface-Mounted Double Robe Hook
This double hook is fabricated from triple chrome-plated, rust-resistant Zamak. A stainless steel wall bracket has two embossed vertical gussets; a stainless steel slotted set screw at the flange secures the hook to the bracket. Overall dimensions are 2-3/16 inches wide by 1-7/16 inches high by 1-29/64 inches deep.
Installation and care
The surface-mounted wall bracket attaches with two #8 x 1-3/8-inch Phillips flat-head screws, which are supplied. The manufacturer suggests mounting at 66 inches above the finished floor; its 2010 ADA guidance calls for the top of the hook to be no higher than 48 inches above the finished floor. For routine cleaning, use a soft cloth with mild detergent, then a water-dampened cloth and a dry cloth.
