ASI 0620-1816 Chan-Lok Frame Plate Glass Mirror, 18" W x 16" H
The ASI 0620-1816 is an 18" wide by 16" high, surface-mounted plate glass mirror. Its one-piece, satin-finish Type 304 stainless steel channel encases the mirror and backing, forming tight mitered corners; wall brackets and a theft-resistant locking screw secure it.
Specifications
- Frame: 20-gauge Type 304 stainless steel with satin finish.
- Channel section: 1/2" x 5/8" (13 x 16 mm), according to the manufacturer’s series specification.
- Glazing: plate glass mirror.
- Mounting: surface mounted on wall brackets, with a theft-resistant locking screw.
Installation guidance
The manufacturer instructs installers to set the H wall brackets level and plumb using #8 or #10 pan-head screws (by others). Start the supplied bottom locking screw before hanging the mirror, then hang it on the brackets and tighten the screw. For installation in accordance with the manufacturer’s cited 2010 ADA Accessibility Standards and 2015 ABA Standards guidance, the bottom edge of the reflecting surface should be no higher than 40" above the finished floor; this is installation guidance, not a blanket compliance determination.
