ASI 0620-3018 Stainless Steel Chan-Lok Frame Plate Glass Mirror
The ASI 0620-3018 is a 30 in. wide × 18 in. high, surface-mounted plate-glass mirror for commercial washrooms. Its one-piece, satin-finish Type 304 stainless steel channel encases the mirror and backing, with tight mitered corners; theft-resistant locking screws secure it to wall brackets.
Verified features
- Frame: 20-gauge, 18-8 Type 304 stainless steel with satin-finish exposed surfaces.
- Standard mirror: 1/4 in. #1-quality plate/float glass, silver-coated and hermetically sealed.
- Backing filler: 1/8 in. water-resistant, abrasion-resistant, shock-absorbing expanded polyethylene microcell foam.
- The manufacturer warrants the mirror against silver spoilage for 15 years from the invoice date.
Mounting guidance
Install the H wall brackets level and plumb using #8 or #10 pan-head screws (not supplied). Start the supplied bottom locking screw before hanging the mirror, then hang it on the brackets and tighten the screw. The manufacturer’s installation guidance for the cited 2010 ADA Accessibility Standards and 2015 ABA Standards specifies that the reflecting surface’s bottom edge should be no higher than 40 in. above the finished floor; this is installation guidance, not a determination of project compliance.
