ASI 0620-1630 Chan-Lok Frame Plate Glass Mirror, 16" x 30"
This surface-mounted mirror uses a one-piece, roll-formed 20-gauge Type 304 satin-finish stainless steel channel, 1/2" x 5/8", to encase the plate glass and backing, with tight mitered corners. Wall brackets support the mirror, which is secured by a theft-resistant locking screw.
Install the H wall brackets level and plumb with #8 or #10 pan-head screws, which are not included. Start the locking screw before hanging the mirror; the #6-32 x 3/4" Phillips pan-head locking screw is supplied separately, taped to the mirror back. ASI's installation guidance for the 2010 ADA Accessibility Standards and 2015 ABA Standards calls for the bottom edge of the reflecting surface to be no higher than 40" above finished floor; verify applicable project requirements.
