ASI 0605-4830 Stainless Steel Mirror with Shelf
This 48 x 30 inch surface-mounted mirror has a satin-finish, 18-gauge Type 304 stainless steel angle frame and a 5-inch-wide stainless steel shelf welded to the face frame. The shelf edges are returned and hemmed; the frame has interlocking construction with welded, polished corners. Plate glass is the standard glazing.
Installation
Install the bracket level and plumb using #10 self-threading screws, which are by others. Hang the mirror on the bracket and tighten the locking screws at the top and bottom. The manufacturer’s ADA/ABA installation guidance calls for the bottom edge of the reflecting surface to be no higher than 40 inches above the finished floor; this is installation guidance, not a blanket compliance determination.
