ASI 0600-2436 Angle Frame Mirror
This 24 x 36 inch surface-mounted mirror has a plate-glass mirror in a roll-formed, 18-gauge Type 304 stainless steel angle frame measuring 3/4 x 5/8 inch (19 x 16 mm). The frame corners are heliarc welded and polished smooth to a uniform satin finish.
A concealed hanging bracket locks to the top and bottom of the frame with tamper-proof set screws. The one-piece back plate attaches to the frame with a theft-resistant locking device.
Installation
Install the bracket level and plumb using #10 self-threading screws, which are by others. Hang the mirror on the bracket and tighten the locking screws at the top and bottom. Manufacturer guidance for the cited 2010 ADA Accessibility Standards and 2015 ABA Standards is to position the bottom edge of the reflecting surface no higher than 40 inches above the finished floor.
