ASI 0482-R Recessed Toilet Seat Cover and Toilet Tissue Dispenser with Napkin Disposal, Reverse
The ASI 0482-R is a recessed combination unit with the toilet-tissue dispenser and napkin receptacle on opposite sides. It holds 1,000 paper seat covers, two standard toilet-paper rolls or two 1,800-sheet rolls in the specified 4-1/2" x 5-1/4" diameter format, and a removable 1.3-gal (4.9 L) waste container.
Capacity and construction
- Dimensions: 17-3/8" W x 30-5/8" H x 4-1/4" D.
- The seat-cover dispenser panel and toilet-paper dispenser door are 18-gauge type 304 stainless steel; the face frame and cabinet are 22-gauge. Satin finish.
- Two theft- and vandal-resistant high-impact plastic toilet-paper rollers have molded-in stainless steel endpins.
- A tumbler lock secures the cabinet door; the unit has a multi-staked piano hinge.
- The disposal door is self-closing. Seat covers self-feed and toilet paper feeds until depleted; the visible supply level provides a low-supply warning.
Recess installation and servicing
Provide a minimum rough wall opening of 15-3/4" W x 29" H x 4" D. Mount in the recess with four #10 self-threading screws through the concealed mounting holes; screws are by others. Unlock and open the door to replenish rolls and seat covers or remove the container for manual emptying.
For the manufacturer’s ADA layout guidance, place the toilet-paper dispenser centerline 7" to 9" from the toilet front, keep the bottom of its opening at least 15" above finished floor, and position the seat-cover opening centerline no higher than 48" above finished floor. Confirm layout against project requirements.
