ASI 045210A-9 Automatic Roll Paper Towel Dispenser
The ASI 045210A-9 is a battery-operated, proximity-sensing dispenser for surface mounting with a stainless steel -9 collar. It dispenses a preset towel length from standard 8- or 9-inch-wide rolls up to 800 feet long, and stub-roll capability allows dispensing to continue with a partial roll.
Specifications
- Dimensions: 17-1/4 inches wide by 28 inches high by 10 inches deep.
- Power: Four D-size batteries, not included.
- Construction: Type 304 stainless steel with a satin finish; the cabinet and frame are 22- and 20-gauge, and the door is 18-gauge stainless steel with a piano hinge.
- Dispensing controls: The owner sets feed length, delay, and economy using three switches.
- Refill: Unlock the door to replace an empty or partially used roll. When loading a full roll with a partial roll remaining, transfer the partial roll to the stub-roll position so dispensing can continue.
- Status: An LED indicates sensing and battery condition; replace batteries as maintenance needs require.
Installation guidance
Use the concealed mounting holes and #10 self-threading screws (by others). Manufacturer guidance for accessible installation specifies that the top of the towel dispenser opening be no higher than 48 inches above the finished floor; local codes may require a lower maximum, such as 40 inches. For general utility installation, the manufacturer specifies a height of 49 to 56 inches from the finished floor to the top of the towel opening.
