ASI 0390-1A EZ-Fill Automatic Soap Dispenser Head

The ASI 0390-1A is a battery-powered, vanity-mounted automatic dispenser head for an EZ-Fill Multi-Feed system. The separately purchased Multi-Feed kit and tank are not included; one system can supply up to six dispenser heads. The tank is refilled from above the vanity.

Installation and operating requirements

• Install through a 1-1/8" deck hole with an adjacent 5/32" hole for the anti-rotation pin.
• Mount the pump/control housing under the vanity within 24" of the shank bottom.
• This battery version uses six D-size 1.5 V batteries, supplied by others. Leave access to the battery compartment for replacement.
• Use clear, non-abrasive liquid soap with viscosity of 100–3800 cP and pH 5.5–8.5. Avoid soaps containing reportable salts, chlorides, or alcohols.

Check the installation guide for complete setup and maintenance instructions.

ASI 0390-1A EZFill Soap Dispenser Spec Sheet
ASI EZ-Fill Soap Dispensing System Installation Guide