ASI 0192-1-93 Turbo-Swift High-Speed ADA Automatic Hand Dryer
The ASI 0192-1-93 is a surface-mounted, touch-free hand dryer with a satin-finish Type 304 stainless steel cover. An adjustable infrared sensor starts the dryer, and a blue LED guides hands toward the concentrated airflow. The manufacturer specifies a drying time of less than 12 seconds.
Product specifications
- Power: 110–120 VAC, 1000 W, 8.3–9.1 A.
- Dimensions: 6-27/32" x 10-1/16" x 4" (174 x 256 x 102 mm); surface mounted.
- Cover: 20-gauge Type 304 stainless steel with satin finish.
- Owner adjustments: air speed, sensor range, and heater on/off.
- Automatic operation includes a 60-second maximum run-time shutoff; the dryer also stops after hands leave the sensor zone.
Installation and mounting
Installation should be performed by a qualified electrician. Electrical service is supplied and connected by others. Four mounting screws and washers are supplied; suitable prepared mountings or other hardware to suit the wall are by others. Use the supplied mounting template and follow the installation instructions. Do not install the dryer over a washbasin.
ASI’s adult mounting guidance specifies the bottom of the sensor lens at no more than 48" above finished floor (AFF) with unobstructed reach, or 44" AFF when forward reach is over an obstruction more than 20" and less than 25" deep. For general utility, the stated sensor-lens height is 44" to 54" AFF.
