ASI 0040 Surface-Mounted Twin 9-Inch Jumbo Roll Toilet Tissue Dispenser
The ASI 0040 is a surface-mounted dispenser for two 9-inch jumbo rolls. It accepts 3-inch cores or 2-1/4-inch cores with the adapters removed; when one roll runs out, shift the slide panel to expose the other roll.
Capacity and construction
- Holds two 9-inch-diameter rolls with 3-inch cores, or 2-1/4-inch cores when the adapters are removed.
- 18-gauge Type 304 stainless steel door cabinet and mounting plate with a satin finish.
- Two viewing slots show the tissue level; a tumbler lock secures the cabinet.
- Overall dimensions: 20-13/16 inches wide by 11-3/8 inches high by 6-3/16 inches deep.
Mounting guidance
The manufacturer recommends mounting within 12 inches of the front of the toilet seat. Its general-utility installation guidance specifies 31 inches above finished floor, measured to the bottom of the unit. For the manufacturer's 2010 ADA installation guidance, position the first-roll centerline 7 to 9 inches from the front of the toilet and the roll centerlines 19 to 44 inches above finished floor. Mounting screws and wall anchors are not included; use fasteners and anchors appropriate for the wall and site conditions.
