-
Dyson HU03 Airblade 9KJ 282997-01 or 314696-01
Our Price: $1,249.00
- Phone: (888) 503-7937
- Fax: 734-943-5906
- Email: CustomerService@ProDryers.com
The HU03 makes the most sense when energy consumption is one of the project's highest priorities. Its selectable power modes let facilities choose between maximum drying performance and even lower energy use while keeping the same slim, wall-mounted Airblade format.
One of the most important differences between the HU03 and other Dyson Airblade models is its selectable operating mode.
| Setting | Rated Power | Rated Dry Time | Best Fit |
|---|---|---|---|
| Eco | 650W | Approx. 12 seconds | Offices and facilities prioritizing very low energy consumption |
| Max | 900W | Approx. 10 seconds | Higher-traffic restrooms where faster throughput matters |
The operating mode is selected on the dryer rather than by the restroom user. Facilities can therefore configure the HU03 around their preferred balance of drying speed and energy use.
The Dyson Airblade 9kJ uses a sealed HEPA filter with a glass-fiber filtration layer and fleece prelayer. Dyson specifies that the filter captures 99.97% of particles down to 0.3 microns from the air passing through the dryer before that air reaches the hands.
HEPA filtration is one part of the dryer system rather than a substitute for proper handwashing or restroom cleaning. For facilities with formal hygiene requirements, always review the current project specifications and applicable standards.
| Height | 19.69 in. (500 mm) |
| Width | 17.72 in. (450 mm) |
| Depth | 4 in. (100 mm) |
| Rated Power | 650W Eco / 900W Max |
| Heater | None |
| Finish | Brushed stainless steel |
Dyson offers HU03 configurations for commercial low- and high-voltage electrical systems. Always verify the exact voltage, circuit requirements and installation instructions for the model being ordered before installation.
The HU03 and Dyson Airblade V HU02 are both slim, hands-under Airblade dryers, but they solve somewhat different purchasing priorities.
| Consideration | HU03 9kJ | HU02 Airblade V |
|---|---|---|
| Primary reason to choose | Very low energy consumption and selectable power modes | Compact overall footprint and broad commercial versatility |
| Dryer style | Hands-under | Hands-under |
| Body | Wider stainless steel body | Narrower compact body |
| Power options | 650W Eco / 900W Max | Fixed operating configuration |
High-use commercial restrooms: Max mode provides a rated 10-second dry time while still operating at only 900 watts.
Energy-conscious facilities: Eco mode lowers rated power to 650 watts while maintaining a rated 12-second dry time.
Offices and commercial buildings: Facilities that value low operating power and a premium brushed stainless steel appearance may find the HU03 especially attractive.
Schools and universities: The low-power design can be useful where many drying cycles occur throughout the day.
Airports, arenas and transportation facilities: The HU03 can handle fast drying while keeping energy use comparatively low, although dryer quantity and peak restroom traffic should be considered during specification.
Dyson offers a replacement HEPA filter specifically for the HU03. Filter life depends on the installation environment and usage. Dyson recommends replacing the filter if airflow decreases or drying time begins to increase.
Routine cleaning also matters. Commercial hand dryers should be maintained as part of the facility's normal restroom cleaning program rather than treated as maintenance-free equipment.
It refers to the low amount of energy used during a drying cycle. In Eco mode, Dyson rates the HU03 at approximately 9.1 kilojoules of energy per dry.
The HU03 is rated at 650 watts in Eco mode and 900 watts in Max mode.
Dyson rates the Airblade 9kJ at approximately 10 seconds in Max mode and 12 seconds in Eco mode under its specified test method.
No. The HU03 does not use a heating element. It removes water using high-velocity sheets of air.
Yes. The HU03 uses sealed HEPA filtration. Dyson states that the filter captures 99.97% of particles down to 0.3 microns from the air passing through it.
Not for every project. We generally prefer the HU03 when very low energy consumption and selectable power modes are important. We often prefer the HU02 when compact width and general commercial versatility are higher priorities.
ProDryers has specialized in commercial hand dryers since 2003. We can help you compare HU03, HU02, AB14, Wash+Dry and competing commercial dryers based on energy use, restroom traffic, installation requirements and budget.