ASI 7402-HBSM Surface-Mounted Toilet Tissue Holder with Hood
The ASI 7402-HBSM is a bright-finish, surface-mounted single-roll holder for standard-core tissue rolls up to 6 in. (152 mm) in diameter. The hood and body are Type 304 stainless steel alloy 18-8; the spring-loaded roller is chrome-plated, high-impact-resistant ABS plastic.
Specifications and installation
- Capacity: one standard-core roll up to 6 in. (152 mm) in diameter.
- Overall dimensions: 6-5/16 in. x 6-5/16 in. (160 x 160 mm).
- Standard mounting uses two #10 screws of suitable length to penetrate wall blocking by approximately 1/2 in. (13 mm); screws are by others.
- For the optional mounting method, suitable expansion anchors and screws are by others and must suit the wall conditions.
For its 2010 ADA Accessibility Standards installation guidance, ASI specifies a roller centerline 19 in. (483 mm) minimum to 42 in. (1067 mm) maximum above the finished floor, and 7–9 in. (178–229 mm) from the front of the commode to the dispenser centerline. The spring-loaded spindle revolves freely and holds the roll until the core is removed. A theft-resistant spindle is optional; specify it by adding R-009 after the model number.
