ASI 20852 Roval Surface-Mounted Sanitary Waste Receptacle
This 1-gallon receptacle has a seamless front and is fabricated from 22-gauge type 304 stainless steel, alloy 18-8, with a satin finish. Its hemmed top edge returns inward. Overall dimensions are 7-1/4" W x 3-1/2" D x 10" H.
For surface mounting, hang the unit from the concealed keyhole slots in its rear panel. Mounting screws are not included: use suitable wall reinforcement with two #10 x 1-1/4" screws, or mount to a metal partition with two #10 x 3/4" screws. ASI's installation guidance for 2010 ADA Accessibility Standards says to position the unit so the top cover is no higher than 48" above the finished floor; this guidance is not a blanket compliance determination.
The user lifts the lid to deposit waste. For servicing, remove the disposable wax-paper liner bag (by others), or unhook the receptacle from its mounting screws and invert it over an appropriate bulk collection container.
