ASI 20365 Roval Automatic Foam Soap and Hand Sanitizer Dispenser
The ASI 20365 is a touch-free, surface-mounted dispenser for liquid foaming soap or foaming hand sanitizer; an optional ASI mobile stand (FS-0300) is identified in the product information. Its satin-finish Type 304 stainless steel body has seamless drawn construction, and a translucent tank makes the fill level visible.
Specifications and operation
- Capacity: 34 oz. (1 L). The sensor activates when an object is within 3-1/8 inches (80 mm) ± 3/8 inch (10 mm) of the unit bottom; each activation dispenses approximately 1/4 to 1/3 oz. (7–9 ml).
- Power: four AA 1.5 V batteries, not included. The LED indicates function and operating condition; the manufacturer specifies suitable battery charge when the LED is not flashing.
- For foaming soap, use liquid within the specified viscosity range of 1–50 mPa·s (cP) and pH range of 5.5–8.5. Avoid soaps containing reportable salts, chlorides, or alcohols.
- Dimensions: 5-1/2 in. W × 10-3/4 in. H × 4 in. D (140 × 273 × 102 mm). The unit has a satin finish and 22-gauge Type 304 stainless steel construction.
- The concealed door locks after refill or battery service. When switching between foaming sanitizer and foaming soap, wash the tank and pump completely.
Mounting and service
The dispenser is surface mounted to a wall; the manufacturer also identifies ASI part FS-0300 as an optional mobile stand. For wall installation, secure the concealed base plate using the mounting holes and a suitable fastening system. Fill with an appropriate liquid, observe the specified soap requirements, and retain the key for future access.
