ASI 0620-2418 24 x 18-Inch Chan-Lok Frame Plate Glass Mirror
The ASI 0620-2418 is a 24-inch-wide by 18-inch-high, surface-mounted plate glass mirror. Its one-piece, 20-gauge type 304 satin stainless steel channel frame encases the mirror and backing, with tight mitered corners. Wall brackets support the mirror; a theft-resistant locking screw secures it.
Specifications and installation
- Mirror: standard 1/4-inch plate glass.
- Frame: 1/2 x 5/8-inch type 304 stainless steel channel with a satin finish.
- Install the wall brackets level and plumb with #8 or #10 pan-head screws; fasteners are by others.
- Start the supplied #6-32 locking screw, taped to the mirror back, before hanging the mirror, then tighten it at the bottom.
- The manufacturer warrants the mirror against silver spoilage for 15 years from invoice date.
For installations following the manufacturer’s 2010 ADA Accessibility Standards and 2015 ABA Standards guidance, the bottom edge of the reflecting surface should be no higher than 40 inches above the finished floor. Actual requirements depend on the installation and applicable standards.
