ASI 0501-2 Surface-Mounted Two-Box Surgical Glove Dispenser
The ASI 0501-2 is a satin-finish Type 304 stainless steel dispenser for two standard surgical glove boxes. Gloves are self-feeding until depleted and are not included; the deburred dispensing opening is designed for snag-free dispensing.
Specifications
- Capacity: two boxes; fits most standard boxes up to 5 in W x 10 in H x 3-3/4 in D.
- Overall dimensions: 10-1/2 in W x 10 in H x 3-3/4 in D.
- Construction: 20-gauge Type 304 stainless steel with satin finish.
- Mounting: surface-mounted; hangs on two pre-installed #10 self-threading screws and is secured through two bottom holes with #10 self-threading screws. Screws and anchors are by others.
ASI recommends mounting the top of the dispenser 48–60 in above the finished floor. For compliance with 2010 ADA Accessibility Standards, the manufacturer’s installation guidance says to position the dispensing slot no higher than 48 in above the finished floor; this guidance is not a blanket compliance determination.
