ASI 0501-1 Surgical Glove Dispenser, One Box
The ASI 0501-1 is a surface-mounted dispenser for one standard surgical glove box. It self-feeds gloves until the supply is depleted, and its fully deburred dispensing opening is designed for snag-free dispensing. Choose it for boxes within the manufacturer’s stated size limits; gloves are not included.
Capacity and specifications
- Holds and dispenses one standard glove box, up to 5 inches wide by 10 inches high by 3-3/4 inches deep.
- Type 304 stainless steel, 20-gauge box body and back, with a satin finish.
- Overall dimensions: 5-1/4 inches wide by 10 inches high by 3-3/4 inches deep.
- Surface mounts on a wall or partition.
Mounting guidance
Hang the dispenser on two pre-installed #10 self-threading screws using the keyhole openings, then secure the bottom with one additional #10 self-threading screw. Screws and appropriate anchors are supplied by others. The manufacturer recommends placing the top of the dispenser 48 to 60 inches above the finished floor. Its 2010 ADA Accessibility Standards installation guidance specifies a maximum 48-inch height for the dispenser slot; this placement guidance alone does not establish compliance.
