ASI 0393-R EZ FILL Remote Control for Foam Soap Dispensers

The ASI 0393-R is a handheld remote for adjusting vanity-mounted EZ FILL automatic foam soap dispensers, including models 0393-(n) and 0394-(n). It adjusts soap volume and air mixed into the soap, so users can tune dispense duration and foam consistency. Liquid soap dispensers require a different remote.

Controls and use

• Hold the remote straight in front of the dispenser sensor, about 4–6 inches away, to issue commands.
• Use the SOAP +/− controls to adjust soap volume and the AIR +/− controls to adjust foam consistency.
• Press FILL after a refill to prime the pump; it runs for one minute. Press FILL again to stop or continue the priming cycle.
• ON/OFF temporarily suspends dispensing for one minute; press it again to resume sooner. RES restores factory settings.
• Batteries are supplied. The manufacturer specifies a CR2032 battery, no service maintenance, and storage in a dry location.

ASI 0393-R EZ-Fill Remote Control Spec Sheet
ASI 0393-R Operating Instructions