SHOP BY SUB CATEGORY, MANUFACTURER, & PRICE
TOP CATEGORIES

Buy Sloan ECOS Flushometers

Sloan ECOS is a sensor-activated diaphragm flushometer line for commercial toilets and urinals. ECOS is offered in single-flush and dual-flush configurations, with battery or hardwired power. The design uses a flex-tube diaphragm and chloramine-resistant components to hold performance in tough water conditions. Closet models are commonly specified at 1.6 gpf or 1.28 gpf. Urinal models are offered at 0.5 gpf, 0.25 gpf, and 0.125 gpf.

Why facilities specify ECOS

  • Hands-free operation with infrared sensing and a manual override for maintenance or code needs
  • Water savings through dual-flush closet options that provide a reduced cycle for liquid waste and a full cycle for solids
  • Flex-tube diaphragm with snap-in regulator matched to the rated volume for reliable metering
  • Logic features that reduce water in high-use urinal scenarios
  • Power choices including battery and 6 VAC hardwired with approved transformers

ECOS model overview

  • ECOS 115
    Exposed, hardwired sensor closet flushometer. Commonly specified at 1.28 gpf high efficiency. Battery variants exist in related families for sites that do not want hardwiring.
  • ECOS 8111 dual-flush
    Exposed, battery closet model offering a reduced 1.1 gpf and a full 1.6 gpf cycle with intuitive split-button selection and sensor activation.
  • ECOS 8186
    Exposed, battery urinal flushometer available at 0.5 gpf, 0.25 gpf, and 0.125 gpf to match the fixture’s rating.
  • RESS retrofit paths
    Retrofit sensor kits for compatible bodies when converting from manual or older electronic valves to ECOS operation.
  • Concealed and specialty
    Select ECOS configurations are available for concealed installations where a clean wall aesthetic is required.

Selection guidance from our team

  • Match volume to the fixture
    Use the bowl or urinal manufacturer’s rated volume. For closets, dual-flush 1.6 or 1.1 is a strong choice where allowed. For urinals, select 0.5, 0.25, or 0.125 based on the fixture.
  • Choose power method up front
    Battery is fast for retrofit work. Hardwired 6 VAC is preferred where no-battery maintenance is a priority.
  • Plan the service kit
    ECOS uses a flex-tube diaphragm with a regulator that must match the gpf. Stock the correct assembly for each volume you maintain.

Popular configurations we support

  • ECOS 115 1.28 gpf hardwired closet for high-efficiency restrooms
  • ECOS 8111 dual-flush 1.6 or 1.1 closet for water savings and clear user cues
  • ECOS 8186 urinal at 0.5, 0.25, or 0.125 for low and ultra-low applications
  • ECOS retrofit kits for converting compatible manual bodies to sensor operation

Maintenance notes

  • Service from the front of the valve body with standard tools
  • Typical items include the flex-tube diaphragm assembly, gpf-matched regulator, sensor module, solenoid operator, and power components
  • For hardwired installations, size transformers correctly and follow wiring and gauge guidance
  • In high-chloramine or hard water, plan proactive diaphragm and regulator replacement intervals to prevent nuisance issues

Troubleshooting quick wins

Closet and urinal valves

  • Short or weak flush: open the control stop, clean the stop strainer, confirm the regulator and diaphragm assembly match the gpf
  • Long flush or run-on: inspect the relief ports for debris, verify the vacuum breaker sleeve and seals
  • False triggers: adjust the sensor range and remove reflective targets in the sensing area
  • Power issues: check battery condition or transformer output, then confirm sensor and solenoid connections

Ordering checklist

  • Valve type and configuration
    Closet or urinal, exposed or concealed, single-flush or dual-flush
  • Rated volume
    1.6 or 1.28 gpf for closets, 0.5 or 0.25 or 0.125 gpf for urinals
  • Power method
    Battery or 6 VAC hardwired, and transformer capacity if hardwired
  • Rough-in and trim details
    Tailpiece length, vacuum breaker tube length, spud coupling size, cover tube and wall flange if needed
  • Service parts to stock
    Flex-tube diaphragm assembly and the correct regulator for each gpf you maintain, plus sensor, solenoid, and power components

Why buy ECOS from ProDryers

  • We verify model and volume against your fixture schedule before shipping
  • Fast quotes for single units or full project lists, including retrofit paths
  • Nationwide fulfillment and expert phone support at 888-503-7937

FAQ

Is ECOS available in both battery and hardwired versions
Yes. ECOS is offered as battery models and as 6 VAC hardwired models using approved transformers.

What are the ECOS dual-flush closet volumes
Dual-flush closet models provide a reduced 1.1 gpf cycle and a full 1.6 gpf cycle.

Which urinal volumes are available
ECOS urinal models are offered at 0.5 gpf, 0.25 gpf, and 0.125 gpf. Always match the valve to the fixture’s rating.

What parts should I keep on hand for ECOS
Keep flex-tube diaphragm assemblies with the correct regulators for the volumes you use, plus a sensor module, solenoid operator, and the power components your site prefers.

!