Palmer Fixture Storm Rider High-Speed Hand Dryer
The Storm Rider is Palmer Fixture's adjustable high-speed hand dryer for commercial restrooms that want fast drying, a modern cabinet and control over airflow. The current HD0960/HD0961 family is available in white, matte black and brushed stainless steel finishes.
Storm Rider Features
- Less than 15 second published dry time
- Adjustable airspeed
- Adjustable infrared sensor range
- Automatic touch-free operation
- 68.2 dB published sound level
- 12,000-18,000 RPM adjustable motor
- 44.2-63.6 CFM adjustable airflow
- White, matte black and brushed stainless finishes
- 110-120V and 220-240V model families
- Surface-mounted commercial design
Why Choose the Palmer Fixture Storm Rider?
The Storm Rider is a good fit when a facility wants more control over how a high-speed dryer behaves. Both motor speed and sensor range are adjustable, allowing the dryer to be tuned for the restroom rather than relying on a single fixed operating point.
Its one-piece cover also gives it a cleaner, more contemporary appearance than many traditional commercial hand dryers while keeping the exterior relatively easy to wipe down.
Where Storm Rider Fits Best
We would consider Storm Rider for commercial restrooms where adjustable airflow, modern styling and straightforward high-speed drying matter more than specialized features such as hands-in drying or an ultra-shallow cabinet.
Adjustable Airflow and Motor Speed
The Storm Rider uses an adjustable brush-type motor with a published range of approximately 12,000-18,000 RPM.
Palmer Fixture also lists adjustable airflow of approximately 44.2-63.6 CFM. That gives facilities some flexibility to balance drying speed, air movement and sound based on the needs of the restroom.
Maximum airflow is not always necessary in every installation. Adjustable operation can be useful in smaller or more acoustically sensitive restrooms where slightly reduced airflow may be preferred.
Adjustable Proximity Sensor
The Storm Rider uses automatic infrared activation with an adjustable sensor range.
Palmer Fixture lists a sensor range of approximately 4 to 9 inches, with a standard setting around 7 inches. This allows the activation zone to be tuned during installation if needed.
The dryer also includes an automatic shutoff after extended operation as part of its built-in timing protection.
Storm Rider Drying Speed and Sound
Palmer Fixture publishes a dry time of less than 15 seconds for the Storm Rider.
The published sound level is approximately 68.2 dB. As with all hand dryer sound ratings, real-world perceived noise can vary with room size, wall materials, mounting location and surrounding surfaces.
The adjustable motor gives facilities some control over the balance between airflow and sound rather than locking the dryer into one fixed speed.
Storm Rider Finishes
The Palmer Fixture Storm Rider is available in several commercial finishes:
- Brushed stainless steel
- White
- Matte black
This gives designers and facility managers more flexibility to coordinate the dryer with other restroom fixtures and finishes.
Storm Rider Voltage Options
Storm Rider is available in low- and high-voltage model families:
| Model Family | Voltage | Available Finishes |
|---|
| HD0960 |
110-120V |
Brushed stainless, white, matte black |
| HD0961 |
220-240V |
Brushed stainless, white, matte black |
Always confirm the building voltage before ordering the dryer.
Storm Rider Dimensions
The current Storm Rider is approximately:
- 11.3 inches high
- 8.07 inches wide
- 7.09 inches deep
- 12.1 pounds net weight
Because the cabinet projects more than four inches from the wall, placement should be reviewed carefully where circulation-path requirements are important.
Storm Rider vs. Other Palmer Fixture Storm Dryers
| Model | Best Fit |
|---|
| EcoStorm |
Lower-cost high-speed drying |
| BluStorm |
Established high-speed design with blue guide light |
| Storm Rider |
Adjustable airflow, sensor range and modern styling |
| BluStorm Bolt |
Shallow wall projection |
| iStorm2 |
Hands-in drying with filtration and water management |
Compare the complete Palmer Fixture Storm hand dryer lineup.
Where Does Storm Rider Make Sense?
Offices: A modern high-speed dryer with adjustable operation for general commercial restrooms.
Restaurants and retail: Automatic operation and multiple finish choices can make Storm Rider easy to coordinate with customer-facing restroom designs.
Schools and institutional facilities: Adjustable airflow and sensor settings provide flexibility where operating conditions vary.
Commercial renovations: Storm Rider can be a straightforward replacement option where a surface-mounted high-speed dryer is appropriate and wall projection is not a limiting factor.
Frequently Asked Questions About Storm Rider Hand Dryers
How fast does the Palmer Fixture Storm Rider dry hands?
Palmer Fixture publishes a drying time of less than 15 seconds for the Storm Rider.
Is Storm Rider adjustable?
Yes. The Storm Rider has adjustable motor speed and an adjustable infrared sensor range.
How loud is the Storm Rider?
Palmer Fixture publishes a sound level of approximately 68.2 dB. Perceived sound can vary depending on the restroom environment and operating setting.
What finishes are available?
Storm Rider is available in brushed stainless steel, white and matte black finishes.
Is Storm Rider available in more than one voltage?
Yes. The HD0960 family is designed for 110-120V service, while the HD0961 family is designed for 220-240V service.
Is Storm Rider a shallow-profile hand dryer?
No. The Storm Rider is approximately 7.09 inches deep. If shallow wall projection is a primary concern, the BluStorm Bolt is the Palmer Fixture model we would compare first.
Need Help Comparing Storm Rider?
ProDryers can help compare Storm Rider with EcoStorm, BluStorm, BluStorm Bolt, iStorm2 and other commercial hand dryers based on airflow, sound, wall conditions, electrical requirements and budget.
Compare Commercial Hand Dryers
