|
| Manufacturer: |
SANIFLOW |
| Model #: |
E88 |
| Cover: |
White Porcelain |
| Spec: |
Click Here |
General Description
· Warm air hand dryer.
· Push-button operated.
· Maximum robustness and power.
· Vandal-proof.
· Suitable for very high traffic facilities.
· It normally goes along with a soap dispenser.
Components & Materials
· Steel one-piece cover with white porcelain enamelled coating 5/64” (1,9 mm) thick. Cover fixed to the base by means of 2 vandal-proof lock screws and lock with special saniflow ® key wrench.
· Base in aluminum, 1/8” (3 mm) thick, with 4 Ø 5/16” (8 mm) holes for wall mounting.
· Fire resistant plastic UL 94-VO fan scroll.
· Motor, universal, 5,500 rpm, B class, included a 4 A fuse with sealed and self-lubricated ball bearings.
· Aluminum centrifugal turbine with double symmetrical inlet.
· Waved wire NiCr heating element that incorporates a safety thermostat.
· Nozzle in chrome plated zamak, 22 μ thick.
· Push -button in chrome plated zamak, 22 μ thick that activates an electromechanical timer with a 34 seconds cycle.
Operation
Press the button to initiate the drying process. The dryer will go on with no interruption for 34 seconds.
Certificates
UL comply with UL499 norm.
Technical Characteristics
| Voltage: |
|
110 - 120 V |
| Power consumption: |
|
16 A |
| Motor: |
|
1/3 HP |
| Nominal power: |
|
1.850 W |
| R.P.M.: |
|
5.500 |
| Heating element: |
|
1.600 W |
| Effective airflow: |
|
203 CFM |
| Free airflow: |
|
290 CFM |
| Noise level at 79''.: |
|
70 dB |
| Air speed: |
|
5.512 LFM |
| Temperature (at 4'' distance / 70ºF): |
|
128 ºF |
| Insulation: |
|
Grounding required |
| Frequency: |
|
50/60 Hz |
| Drying time: |
|
29" |
| Montaje: |
|
Surface |
| Size: |
|
11-1/8"W x 10"H x 8-1/4"D |
| Weight: |
|
14.33 Lbs |
Specification
Surface mounted vandal resistant hand dryer shall be fabricated with one-piece 5/64” thick metal sheet cover, with glazed porcelain coated. The back base shall be aluminum, 1/8” thick and with 4 holes for wall mounting. Cover shall be equipped with a chromed-plated revolving 360º nozzle for hand and face drying. The dryer shall be activated using the chrome-plated zamak 22 μ thick Push-button, that activates an electromechanical timer with a 34 second cycle before switching dryer off automatically. Motor shall be 1/3 hp, 5,500 r.p.m. , universal type, with a 4A fuse with sealed, self- lubricated ball bearing; The waved wire NiCr heating element should incorporate a thermal limiter which will switch off by a temperature of 176 ºF (80ºC). The fan should be an aluminum centrifugal turbine with double symmetrical inlet, and the fan scroll shall be made of a fire resistant plastic UL 94-V0. Dryer shall deliver 290 CFM of air at 128 ºF (53 ºC) and 5,512 LFM velocity during user controlled drying cycle. The dryer shall have a total power of 1,850 W with a consumption 16A. Noise level should be 70 dB. Overall dimensions shall be 11”W x 9-3/4”H x 8-1/4”D. Unit shall be UL listed, and /or VDE approved and CE marked.
Surface-Mounted Hand Dryer shall be Model E88 of Saniflow Corporation, 12800 N.W. 38 Avenue Miami, Florida 33054-4525.
|
