Chicago Faucets WXFJKABCP
The Chicago Faucets WXFJKABCP is a genuine OEM straight inlet supply arm designed for wall-mounted manual faucets. This high-quality component serves as the connection point between your facility's water supply and the faucet body, providing a 2" reach. It features a 1/2" NPT female thread inlet for the wall connection and a 1-1/16"-18 UNEF female thread outlet to receive the faucet body. Finished in high-luster polished chrome (CP) and including a 2-1/2" diameter slip flange, this arm provides a clean, professional look that hides rough-in holes. As an ECAST® product, it is constructed from lead-free brass, ensuring full compliance with NSF/ANSI 372 and federal safe drinking water standards.
Expert Insight:
The WXFJKABCP is the standard choice for fixed-center wall-mount installations where a straight, clean projection is required. Unlike offset arms that allow you to adjust the width between inlets, these straight arms require your plumbing to be roughed-in at exactly the width of your faucet body (typically 8" centers). Installation Tip: Because this arm has a female 1/2" NPT inlet, you will need a 1/2" NPT male nipple protruding from the wall. Ensure the nipple is perfectly level; even a slight tilt will make it difficult to mount the faucet body flush. Pro Tip: Use the included slip flange to cover the wall connection, but don't forget to use thread sealant or PTFE tape on the wall nipple to ensure a watertight seal before you slide the flange home. Need to convert to an adjustable center setup instead? Call ProDryers at 888-503-7937!
