Chicago Faucets UVC-02ABNF BioArmor™ UV-C Disinfection System
BioArmor, with UV-C LED technology, provides secondary water treatment at a hand washing sink. Easily installed between the incoming water lines and the faucet, BioArmor attacks pathogens using UV-C light to penetrate cells and render them microbiologically inactive. When water flow is detected, it delivers instant full-intensity power – without heat transfer – to disinfect the water.
Features
- Separate hot and cold water treatment
- Up to 1.5 GPM per side (hot and cold)
- Installs between the stop valves and the faucet
- Standard 3/8" compression inlets and outlets
- Wall mounted
- 110VAC to 12VDC transformer required (included)
- Indicators (Green = On, Red = Replace)
- Minimum UVT 95%
- System Alarm:
- Frequency 600Hz
- Sound - Min 80 dBA
- Starts with water activation when there is an error condition
- Stops 10 sec after water is deactivated
- Errors: Low UV, LED Failure, Over Temperature
Performance Specification
- Rated Operating Pressure: 20-125 PSI
- Rated Operating Temperature: 40-180°F
- Power Input: 20W
Warranty
- 2-year limited warranty
