Bradley Corp HSL1 SafeCare Single Station Lavatory
***Quote only item, please call 888-503-7937. Item cannot be ordered online.***
*** Bradley lavatory/sinks are non-cancelable or returnable. ***
For all available options Download the Bradley HSL1 SafeCare Single Station Lavatory Spec Sheet
- Ligature-Resistant Design
- Infrared activated sprayhead faucet
- Sprayhead mounted flush to basin
- Contoured sprayhead and basin
- Fully-enclosed stainless steel or high impact polymer trap cover
- Custom shelf extensions available
- Mount with Optional Surface Bracket by Bradley or In-Wall Carriers by Others
Wall-hung single station fixture is designed to minimize ligature points. The preassembled sprayhead module is equipped with an independent streamformer that is served by an infrared sensing module and solenoid valve (Model HSL1/IRP), or an independent battery IR sensor and battery (Model HSL1/BIR3), TouchTime electronic mechanical metering pushbutton (HSL1/TTPA), or TouchTime electronic piezo metering switch (HSL1/TTPB). Standard flow rate of .5 GPM meets industry standards for water conservation, while providing enough water to rinse hands quickly and efficiently. Operating range is 20–80 PSI.
Bowl and Sprayhead:
Constructed of Terreon, a densified solid surface material composed of a bio-based resin, or TerreonRE, a densified solid surface material composed of a bio-based resin and preconsumer recycled granules. Terreon and TerreonRE are resistant to chemicals, stains, burns and impact. Surface damage can be easily repaired with everyday cleansers or fine grit abrasives. Terreon and TerreonRE are GREENGUARD certified as low-emitting materials.
The HSL1 is designed to mount at different heights (adult and children) to comply with guidelines on reaches, clearances and operation for various codes including, ADA Accessibility Guidelines for Buildings and Facilities (ADAAG). Always check your local and state codes. The HSL1 can be supported by a surface-mounted bracket supplied by Bradley or in-wall carriers supplied by others. The surface-mounted bracket is constructed of 1" square structural tubing and is zinc-plated mild steel. The surface-mounted bracket also includes a locking device and leveling screws.