ASI 3932 Anchor for 1/2-Inch Partition-Mounted Grab Bars
The ASI 3932 is an anchor for grab bars mounted through 1/2-inch (13 mm) thick partitions with snap-on flange covers. The plate is 3 inches (76 mm) in diameter and 1/8 inch (3 mm) thick, fabricated from Type 304 alloy 18-8 stainless steel with a No. 4 satin finish on the exposed side. Two 1/4-20 posts are welded to the plate.
Each kit contains one plate and two 1/4-20 x 1/2-inch Phillips pan-head machine screws. Specify one kit per flange. For installation, mark the mounting locations with the grab bar in position and drill 3/8-inch (10 mm) holes through the partition. Place the anchor on the far side and fasten the grab bar from the near side with the provided machine screws. Refer to the grab bar specification for its installation procedure and strength data.
