Palmer Fixture iStorm2 Hands-In Hand Dryer
The iStorm2 uses a hands-in drying format that directs high-speed air around the user's hands while managing the water removed during drying. Palmer Fixture combines adjustable airflow, filtration, switchable heat and a ceramic backsplash with a drain tray in one commercial hand dryer.
iStorm2 Features
- 10-15 second published dry time
- Hands-in drying design
- Adjustable airspeed
- 3-layer HEPA filtration
- Water-absorbing ceramic backsplash
- Drain tray for excess water
- Switchable heater
- Dual-color LED sensor indicators
- Antibacterial surface treatment
- Surface-mounted installation
- Available in platinum, black and white
- 5-year limited manufacturer warranty
How the iStorm2 Dries Hands
The iStorm2 is different from a traditional hands-under dryer. Users place their hands into the large drying opening, where high-speed air is directed around the hands to remove moisture quickly.
Palmer designed the airflow to move water down and away from the user rather than allowing it to collect on the surrounding floor.
The drying format also lets users keep their hands in a natural position rather than holding them beneath a wall-mounted outlet.
Water Management and Ceramic Backsplash
One of the iStorm2's most distinctive features is its water-management system.
A water-absorbing ceramic backsplash helps capture moisture removed from the hands. Excess water is directed toward the dryer's drain tray rather than being pushed onto the floor around the unit.
This design is intended to reduce water splash-back and help keep the surrounding restroom floor drier during normal use.
HEPA Filtration
The iStorm2 includes a 3-layer HEPA filter. Palmer Fixture states that the filtration system removes more than 99% of airborne bacteria from the incoming air stream.
The filter is part of the dryer's air-intake system and should be maintained according to the manufacturer's instructions to preserve airflow and filtration performance.
Adjustable Airspeed
The iStorm2 uses an adjustable motor rated from approximately 11,000 to 20,000 RPM.
Palmer also lists adjustable warm-air speed from approximately 140 to 224 mph. This gives facility managers some control over the balance between drying performance and sound.
Heater On or Off
The iStorm2 includes a switchable heating element, allowing the dryer to operate with or without supplemental heat.
| Operating Mode | Approx. Power |
|---|
| Heater On |
Up to 1,600W |
| Heater Off |
Approx. 700W |
Turning the heater off can significantly reduce connected operating wattage while retaining the high-speed airflow used for drying.
Sound Level
Palmer Fixture publishes an operating sound range of approximately 65 to 78 dB depending on airflow setting and operating conditions.
Real-world sound will vary with motor setting, restroom size, wall materials and surrounding surfaces.
iStorm2 Voltage Options
| Model | Voltage | Current |
|---|
| HD0983 |
110-120V |
12.2-13.3A |
| HD0984 |
208-220V |
5.7-6.6A |
| HD0985 |
277V |
6.6A |
The HD0985 277V version is listed by Palmer as a special-order configuration. Always confirm the building's electrical service before ordering.
iStorm2 Dimensions and Construction
| Width |
12.67 in. |
| Height |
24.59 in. |
| Depth |
7.28 in. |
| Weight |
23.8 lbs. |
| Material |
Polycarbonate ABS |
| Mounting |
Surface-mounted |
Current finish options include platinum, black and white.
iStorm2 vs. Other Palmer Fixture Storm Dryers
| Model | Best Fit |
|---|
| EcoStorm |
Lower-cost high-speed drying |
| BluStorm |
Traditional hands-under drying with blue guide light |
| Storm Rider |
Adjustable high-speed drying with modern styling |
| BluStorm Bolt |
Shallow-profile surface mounting |
| iStorm2 |
Hands-in drying, filtration and water management |
See the complete Palmer Fixture Storm hand dryer lineup.
Where Does the iStorm2 Make Sense?
High-traffic commercial restrooms: Hands-in drying and water management can be useful where large numbers of users cycle through the restroom.
Corporate and institutional facilities: The enclosed drying area and HEPA filtration may appeal to facilities that want a more feature-rich dryer than a conventional hands-under model.
Restrooms where floor moisture is a concern: The ceramic backsplash and drain tray are designed specifically to manage water removed during drying.
Projects prioritizing user experience: The large hand opening, LED indicators and adjustable operation provide a different user experience from traditional wall-mounted dryers.
Frequently Asked Questions About the iStorm2
How fast does the Palmer Fixture iStorm2 dry hands?
Palmer Fixture publishes a drying time of approximately 10-15 seconds.
Does the iStorm2 have a HEPA filter?
Yes. The iStorm2 includes a 3-layer HEPA filter, which Palmer states removes more than 99% of airborne bacteria from the incoming air stream.
How does the iStorm2 manage water?
The dryer uses a water-absorbing ceramic backsplash and a drain tray to help capture water removed from the hands and reduce moisture around the dryer.
Can the iStorm2 operate without heat?
Yes. The heating element can be switched off. Palmer lists approximately 700 watts of operating power with the heater disabled.
What colors are available?
The current iStorm2 is available in platinum, black and white finishes.
What warranty does the iStorm2 have?
Palmer Fixture currently lists a 5-year limited warranty for the iStorm2.
Need Help Comparing iStorm2?
ProDryers can help compare the iStorm2 with BluStorm, EcoStorm, Storm Rider, BluStorm Bolt and other commercial hand dryers based on drying format, filtration, water management, electrical requirements, sound and budget.
Compare Commercial Hand Dryers
