BOBRICK B-980616x36 Vinyl Coated Bariatric Grab Bar, 36" Long
Bobrick B-980161x36 vinyl-coated bariatric grab bar shall be corrosion resistant, zinc coated steel pipe with vinyl antibacterial, biocompatible, and warm-to-the-touch
coating with glossy finish. Grab bar shall have 1/8" (3mm) wall thickness, 1/8" (3mm) extruded plastic finish coating
thickness, and 1-1/4" (32mm) outside diameter. Clearance between the grab bar and wall shall be 1-1/2" (38mm).
mounting flanges shall be Type 304 stainless steel with 11 holes for three plugs and stainless steel screws for attachment to
wall covered by fiberglass reinforced nylon sleeves. Flange covers shall be fiberglass reinforced nylon with glossy finish 13/16"
(21mm) thickness and 3-1/8" (80mm) diameter, and shall snap over mounting flanges to conceal mounting screws. Ends of
grab bar shall pass through concealed mounting flanges. Grab bar shall comply with accessible design (including ADAAG in
the U.S.A.) for structural strength.
Bobrick B-980616x36 Vinyl-Coated Grab Bar Spec Sheet