BOBRICK B-980616x42 Vinyl Coated Bariatric Grab Bar, 42" Long
Bobrick B-980161x42 vinyl-coated bariatric grab bar shall be corrosion resistant, zinc coated steel pipe with vinyl antibacterial, biocompatible, and warm-to-the-touch coating with glossy finish. Grab bar shall have 1/8" (3mm) wall thickness, 1/8" (3mm) extruded plastic finish coating thickness, and 1-1/4" (32mm) outside diameter. Clearance between the grab bar and wall shall be 1-1/2" (38mm).
Concealed mounting flanges shall be Type 304 stainless steel with 11 holes for three plugs and stainless steel screws for attachment to wall covered by fiberglass reinforced nylon sleeves. Flange covers shall be fiberglass reinforced nylon with glossy finish 13/16" (21mm) thickness and 3-1/8" (80mm) diameter, and shall snap over mounting flanges to conceal mounting screws. Ends of grab bar shall pass through concealed mounting flanges. Grab bar shall comply with accessible design (including ADAAG in the U.S.A.) for structural strength.Bobrick B-980616x42 Vinyl-Coated Grab Bar Spec Sheet