BOBRICK B-580616x42 Vinyl Coated Grab Bar, 42" Long
Bobrick B-580161x42 vinyl-coated grab bar shall be corrosion resistant, zinc coated steel pipe with vinyl antibacterial, biocompatible, and
warm-to-the-touch coating. Grab bar shall have 1/8" (3mm) wall thickness, 1/8" (3mm) extruded plastic finish coating thickness,
and 1-1/4" (32mm) outside diameter. Clearance between the grab bar and wall shall be 1-1/2" (38mm).
Concealed mounting flanges shall be fiberglass reinforced nylon plate and equipped with four screw holes for attachment to wall. Flange covers shall be fiberglass reinforced nylon with glossy finish, 3-1/4" (83mm) diameter, and shall snap over mounting flanges to conceal
mounting screws. Ends of grab bar shall pass through concealed mounting flanges. Grab Bar shall comply with accessible
design (including ADAAG in the U.S.A.) for structural strength.
Bobrick B-580616 Vinyl-Coated Grab Bar Spec Sheet