BOBRICK B-49916 Vinyl Coated Swing-Up Grab Bar
Bobrick B-49916 vinyl-coated swing-up grab bar with reinforced joint shall be corrosion resistant, zinc coated steel pipe with vinyl
antibacterial, biocompatible, and warm-to-the-touch coating. Grab bar shall have 1/8" (3mm) wall thickness, 1/8"
(3mm) extruded plastic finish coating thickness, and 1-5/16" (33mm) outside diameter. Back plate shall be 3/16"
(4mm) thick AISI 304 stainless steel, equipped with screw holes for attachment to wall. Swing-up Grab Bar shall
be manually raised for approach or departure and lowered to horizontal position for support; grab bar is raised to
upright position against wall and remains in vertical position until lowered to horizontal position.
Bobrick B-49916 Vinyl Coated Swing-Up Grab Bar Spec Sheet