Chicago Faucets 1919-039KJKABNF
The Chicago Faucets 1919-039KJKABNF is a genuine OEM 36" stainless steel hose assembly designed for high-performance commercial kitchen and laboratory applications. This flexible hose serves as the primary conduit for pre-rinse faucets, pot fillers, and utility spray units. Constructed with a durable, kink-resistant stainless steel outer braid and a high-temperature internal liner, it is built to withstand the rigors of high-pressure industrial environments. As an ECAST® product, it is manufactured from lead-free materials, ensuring full compliance with federal drinking water standards. The 36" length provides an optimal balance of reach and control for standard-sized commercial sinks.
Expert Insight:
The 1919-039KJKABNF is a commercial workhorse. Unlike residential pull-out hoses, this stainless steel braided version is designed for constant pressure and high-temperature water. Installation Tip: This hose features 3/8" NPT male thread connections on both ends. When installing, always use a fresh application of PTFE (Teflon) tape on the threads to ensure a watertight seal. Hand-tighten first, then use a wrench for an additional 1/4 to 1/2 turn—do not over-torque, as this can damage the internal seals. Pro Tip: If your pre-rinse unit is leaking near the handle, it's often the small gasket at the end of the hose rather than the hose itself. However, if you see fraying or "kinking" in the stainless steel braid, replace the hose immediately to prevent a high-pressure burst after hours. Need a longer reach? We also stock the 48" (1919-048KJKABNF) and 60" (1919-060KJKABNF) versions. Call ProDryers at 888-503-7937 for help with sizing!
