Chicago Faucets 1888-001KJKABCP
The Chicago Faucets 1888-001KJKABCP is a complete, genuine OEM 9-1/2" swing tube spout assembly designed for deck-mounted manual faucets. This assembly features an integral flange at the base, providing a seamless, one-piece look and extra structural stability where the spout connects to the faucet body. It is equipped with a Softflo® aerator (typically 2.2 GPM) that provides a smooth, pressure-compensated stream. As an ECAST® certified product, it is manufactured from high-quality lead-free brass, ensuring full compliance with NSF/ANSI 372 and all federal drinking water regulations. Designed specifically for the 1888-series faucets, this spout offers a full 360-degree range of motion for maximum versatility in commercial kitchen and prep areas.
Specifications:
- For use with 1888-ABCP only
- 9-1/2" fixed centers
- Outlet: E3JKABCP
- 1-1/16"-18 female thread inlet
- 13/16"-24 male thread outlet
- 360-degree swing
- Overall Height: 6-1/4"
- Height to Outlet: 4-3/8"
Expert Insight:
The 1888-001KJKABCP is the "full kit" replacement. While you can buy the flange and spout separately, this assembly is preferred for maintenance because it includes the pre-installed internal O-rings and split-ring required for a leak-free swing motion. Installation Tip: Before dropping the new spout into the faucet body, apply a small amount of food-grade silicone grease to the internal O-rings. This will ensure the spout swings effortlessly and prevents the rubber from tearing during the initial install. Pro Tip: This spout is specifically designed for the 1888-ABCP and 1888-XKABCP faucets. Because it uses a 1-1/16"-18 UNEF female thread inlet, it won't fit standard residential faucet bodies. If your current spout is "binding" or hard to turn, it's often more cost-effective to replace the whole assembly than to rebuild the internal seals. Need a high-efficiency 1.5 GPM aerator for this spout instead? Call ProDryers at 888-503-7937!
