Satin-finish stainless steel with stainless steel dispensing mechanism. Flush tumbler lock. Holds two rolls up to 5-1/4" (133mm) dia. (1800 sheets).
Cabinet — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. All-welded construction. Exposed surfaces have satin finish.
Flange — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn, one-piece, seamless construction. Radius on corners
and return edges complement corners and edges of door.
Door — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with 18-gauge (1.2mm) stainless steel door frame. Exposed surfaces have satin
finish. Front of door is drawn, one-piece, seamless construction and has same degree of arc as other Bobrick Contura Series washroom
accessories. Radius on corners and edges of door complement other Contura Series accessories. Secured to cabinet with two rivets.
Equipped with a flush tumbler lock keyed like other Bobrick washroom accessories.
Dispensing Mechanism, Inner Housing, and Cam — 18-8 S, type-304, 18-gauge (1.2mm) stainless steel.
Spindles (2) — Heavy-duty, one-piece, molded ABS. Theft-resistant. Retained in dispensing mechanism when door is locked.
Unit holds two standard-core toilet tissue rolls up to 5-1/4" (135mm) diameter (1800 sheets). Tissue rolls are loaded and locked into
dispensing mechanism. Extra roll automatically drops in place when bottom roll is depleted. Depleted rolls can only be removed after
Provide framed rough wall opening 6-1/4" wide x 11-1/4" high (160 x 290mm). Minimum recessed depth required to finish face of wall is
3-1/4" (83mm). Allow clearance for construction features that may protrude into opening from opposite wall. Coordinate with mechanical
engineer to avoid pipes, vents, and conduits. Mount unit in wall opening with shims between framing and cabinet at all points indicated by
an S, then secure unit with four #10 x 5/8" (4.8 x 16mm) sheet-metal screws (not furnished).
Recessed multi-roll toilet tissue dispenser shall be type-304 stainless steel with all-welded construction, including dispensing mechanism,
inner housing and cam; exposed surfaces shall have satin finish. Front of toilet tissue dispenser door shall be drawn, one-piece, seamless
construction and shall have same degree of arc and match other Bobrick Contura™ Series accessories in the washroom. Radius on corners
and edges of flange and door shall complement other Bobrick Contura™ Series washroom accessories. Door shall be secured to cabinet
with two rivets and equipped with a flush tumbler lock keyed like other Bobrick washroom accessories. Flange shall be drawn, one-piece,
seamless construction. Unit shall dispense two standard-core toilet tissue rolls up to 5-1/4" (135mm) diameter (1800 sheets). Extra roll
shall automatically drop in place when bottom roll is depleted. Unit shall be equipped with two theft-resistant, heavy-duty, one-piece,
molded ABS spindles.