Classic Series Recess Mounted Combination Dispenser
- Holds 1,000 single or half-fold paper covers
- Door unlocks with key provided & swings open for filling
- Receptacle is removable for servicing
- Unit holds 2 standard-core toilet tissue rolls up to 5-1/4"
Cabinet — 18-8 S, type-304, heavy-gauge stainless steel. All-welded construction. Exposed surfaces have satin finish. Flange — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn and beveled, one-piece, seamless construction. Door — 18-8 S, type-304, 18-gauge (1.2mm) stainless steel with satin finish. One-piece, seamless construction. Secured to cabinet with a full-length stainless steel piano-hinge. Equipped with two tumbler locks keyed like other Bobrick washroom accessories. Toilet Tissue Dispensers (2) — .100" (2.5mm) thick ABS. 18-8 S, type-304, 26-gauge (0.5mm) stainless steel waste deflector attached to the top toilet tissue dispenser only. Equipped with two theft-resistant, heavy-duty, one-piece, molded polyethylene spindles. Disposal Panel — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with hemmed edges; exposed surface has satin finish. Secured to cabinet with a spring-loaded, full-length stainless steel piano-hinge. Equipped with an international graphic symbol identifying napkin disposal. Waste Receptacle — Leak-proof molded polyethylene. Removable for servicing. Capacity: 0.8-gal. (3.0-L).
Toilet-seat-cover dispenser holds 1000 single- or half-fold paper covers. Door unlocks with key provided and swings open for filling. Spindles may be removed from cabinet only when door is open. Receptacle is removable for servicing. Unit holds two standard-core toilet tissue rolls up to 5?1/4'' (135mm) diameter (1800 sheets). Designer's Note: Disposable liners are available as an accessory for sanitary napkin disposal: order Bobrick Part No. 353-12. INSTALLATION: Mount unit on wall with four #8 x 1-1/4" (4.2 x 32mm) sheet-metal screws (not furnished) at points indicated by an S. For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws. For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws, or provide 1/8" (3mm) toggle bolts or expansion bolts.
Surface-mounted toilet-seat-cover dispenser, sanitary napkin disposal, and toilet tissue dispenser shall be type-304 stainless steel with
all-welded construction; exposed surfaces shall have satin finish. Toilet tissue dispensers shall be ABS plastic with a type-304 stainless
steel waste deflector attached to the top tissue dispenser. Flange shall be drawn and beveled, one-piece, seamless construction. Unit
shall be mounted on side wall of single toilet compartment. Door shall be one-piece, seamless construction; secured to cabinet with a
full-length stainless steel piano-hinge; and equipped with two tumbler locks keyed like other Bobrick washroom accessories. Toilet seat-
cover dispenser shall hold 1000 paper covers. Self-closing disposal panel shall be secured to cabinet with a spring-loaded, full length
stainless steel piano-hinge has hemmed edges and equipped with an international graphic symbol identifying napkin disposal.
Sanitary napkin disposal shall be furnished with a removable, leak-proof, molded polyethylene receptacle with a capacity of 0.8-gal.
(3.0-L). Unit shall be equipped with two theft-resistant, heavy-duty polyethylene toilet tissue spindles that hold standard-core rolls up to
5-1/4'' (135mm) diameter (1800 sheets). Spindles shall be removable from cabinet only when door is open. Manufacturer's service and
parts manual shall be provided to the building owner/manager upon request.