Free Shipping to the Continental US on all products at ProDryers.com!
Optional TowelMate Accessory for Paper Towel Dispensers- B-3944-130
Fits into Bobrick Model Number(s) B-3942, B-3944, B-3947, and B-3949 ClassicSeries® Paper Towel Dispensers.
- TowelMate accessory module shall be type-304 stainless steel with 2B finish.
- Reduces paper waste by 20% - 40%.
- Black nylon support rod prevents papers from bulging, sagging or falling through the opening.
- 90° return towel guide prevents paper towels from falling forward when door is opened for servicing.
- Complies with US EPA Reduce & Reuse Resource Conservation Initiative.
- Universally fits Bobrick's and other Manufacturers' similar models.
- Retrofits into installed towel dispensers.
- Specify for new installtions.
TowelMate Module – 18-8 S, Type 304, 24-gauge (0.6mm) stainless steel with 2B fi nish. TowelMate Support Rod – Black, 3/8" (10mm) diameter Nylon 6/6 Rod fastened to Module with two stainless steel sheet metal screws. OPERATION: Optional TowelMate Accessory fi ts into Bobrick Model number(s) B-3942, B-3944, B-3947, or B-3949 ClassicSeries Paper Towel Dispensers; and B-4362, B-43944, B-43949 ConturaSeries standard in units after May 2010. TowelMate Accessory Module has towel guide angle with 90 degree return to prevent paper towels from falling forward out when door is opened for servicing. TowelMate Accessory Support Rod allows dispenser to dispense paper towels one at a time without tabbing, tearing, bulging, sagging and bunching. To load paper towels in towel tray, place stacks of folded paper towels inside module with bottom paper towel leaf facing forward. Feed fi rst sheet from bottom of the towel tray opening over the rod and through the opening to conceal rod and start dispense.
Open door of towel cabinet and remove all existing paper towels from dispenser. Remove existing plastic towel adapter secured inside dispenser cabinet to clear unit of any obstructions. Remove protective fi lm from double back tape on the back of TowelMate Accessory and place Module inside towel dispenser. Position TowelMate Support Rod evenly over the towel tray opening with bottom of module resting down on inside of towel tray and fi rmly press TowelMate Module into dispenser cabinet back. Load stacks of paper towels into cabinet, start dispense, close cabinet door. For units manufactured prior to July 2006 with stainless steel Towel Guide brackets, insert TowelMate positioned between brackets.
TowelMate Accessory module shall be type-304 stainless steel with 2B fi nish. Black nylon support rod, 3/8" (10mm) diameter, fastened to module with stainless steel sheet metal screws. TowelMate Accessory fi ts into Bobrick Model number(s) B-3942, B-3944, B-3947, and B-3949 ClassicSeries Paper Towel Dispensers and other manufacturers' similar models; and B-4362, B-43944, B-43949 ConturaSeries standard in units after May 2010. Paper Towel Dispenser fi tted with TowelMate Accessory shall dispense 800 multifold paper towels. TowelMate Accessory Module has a 90 degree return towel guide angle to prevent paper towels from falling forward out when door is opened for servicing, and a TowelMate Nylon Support Rod fi tted across the center of the towel tray opening to dispense paper towels one at a time without tabbing, tearing, bulging, sagging or bunching (falling through the opening). TowelMate reduces paper towel waste by 20% – 40% and complies with US EPA Reduce & Reuse Resource Conservation Initiative.Click Here For The Full Specification Sheet