Bradley Modesty Module Showers
***Quote only item, please call 888-503-7937. Item cannot be ordered online.***
*** Bradley Showers are non-cancelable, non-returnable.
- Unit Complete with Curtain and Necessary Hardware for Installation
- Available with Column or Econowall Showers
- Showers Factory Assembled and Hydrostatically tested to 150 PSI
- Ready for Hookup to Plumbing Supplies
Constructed of type 304 stainless steel polished to a #4 finish. Column and column cap
are 16 gauge and base flange is 13 gauge. Drain fitting is cast iron with five stainless steel
mounting bolts. Column is drilled and tapped to accept partition stirrups.
Shower panel, mounting frame, and top and bottom covers constructed of 18 gauge
stainless steel polished to a #4 finish. Stainless steel soap tray for each station mounted to
panel. Standard fixed direction adjustable spray showerhead for each station.
Constructed of 3/4" type "L" copper tubing.
Fabricated of 20 gauge 300 series stainless steel sheets polished to a #4 finish. Sandwich
type construction with waterproof cores securely bonded between sheets. Standard
partitions are 58" high.
Partitions are secured to column shower and posts with 14 gauge type 304 stainless steel
stirrups and stainless steel screws.
Fabricated 18 gauge 1-1/4" square stainless steel tubing. Post is secured to floor with an
expansion anchor and a concealed foot angle which allows plus or minus 1/2" vertical
Wood seats are 10"W x 33-1/2"L x 16"H varnish finished oak.
Curtain rails fabricated of aluminum rectangular tubing. Curtain hooks are steel wire with a
zinc chromate finish. Curtains are 60"W X 74"H and fabricated of heavy gauge translucent
vinyl with hemmed edges, and aluminum grommet reinforced eyelets.
All exposed fasteners are vandal-proof and either stainless steel or chrome-plated.
Post shoes are anodized aluminum and finished to match stainless steel.