M02AC MEDIFLOW HAND DRYER – Automatic – Polished Stainless Steel Cover

General Description

· Warm air hand dryer.
· Sensor operated by hand approximation.
· Airflow temperature electronic regulation.
· Maximum power and airflow.
· Maximum robustness and vandal-proof.
· Suitable for very high traffic facilities.
· Also in recessed version conform to ADA projection requirements.
· It normally goes along with a soap dispenser.

Components & Materials

· Stainless steel AISI 304 one-piece cover bright finish, 1/16” (1.5 mm) thick. Cover fixed to the base by means of 2 vandal-proof lock screws and lock with special mediflow ® key wrench.
· Fire resistant plastic Noryl V0 base and fan scroll, with 4 Ø 5/16” (8 mm) holes for wall mounting. It includes silent-blocks to dampen mechanical vibrations.
· Motor, universal with brushes, 4,500 rpm, A class, includes a safety thermostat.
· Aluminum asymmetrical double inlet fan wheel.
· Fe, Al & Cr taped winding coil filament resistor that incorporates a safety thermostat. · Automatic disconnection ½ second before motor stop.
· Automatic regulation of air temperature on ambient temperature.
· Adjustable (2”-8”) IR electronic detection sensor with polycarbonate viewing window.
· Selective detection of fixed targets and automatic disconnection system after 120 seconds of continuous use.

Operation
Place the hands under the air outflow valve. The dryer will start automatically, and go on with no interruption as long as the hands are kept in the detection range of the sensor. As a safety measure, the appliance will stop after 120 seconds.



Certificates
UL comply with UL499 norm.

Technical Characteristics