Gamco 150S-45 Horizontal Grab Bar with Snap Flange
150S-45 horizontal shower grab bar is 1-1/2" (38mm) diameter stainless steel. Tubing is fabricated of type 304 18-gauge stainless steel. Exposed surfaces polished to a #4 satin-finish.
Mounting plate for
Snap Flange is 11-gauge (3mm) type 304 stainless steel, 3" (76mm) in diameter and welded to bar. Snap flange cover plate
escutcheon, which is decorative only, is 22-gauge (0.8mm) type 304 stainless Steel. Mounting plates and center posts are welded to tubing.
Grab bars have been designed and tested to withstand 1300 lbs. downward pull when properly installed. This exceeds HUD,
HEW, FHA, VA, and other Federal, State, and local codes, including the Americans with Disabilities Act (ADA). Dimensions are
measured from center-line to center-line of tubing.
Download the Gamco 150S-45 Grab Bar Spec Sheet