Gamco 150C Series 18" Straight Grab Bar with Concealed Flange
150C Series straight shower grab bar with concealed flange is 1/2" (13mm) deep, 11-gauge (3mm) type 304 stainless steel, 3" (76mm) in diameter furnished with 3 stainless steel set
screws and one back plate. Flanges and center posts are welded to tubing.
Grab bars have been designed and tested to withstand 900 lbs. downward pull when properly installed. This exceeds HUD, HEW, FHA, VA, and
other Federal, State, and local codes, including the Americans with Disabilities Act (ADA). Dimensions are measured from center-line to centerline
of tubing, unless noted on grab bar application by circle dimensions which are from center-line of tubing to wall.
Download the Gamco 150C Series Straight Grab Bar Spec Sheet