Model FD7003-1Z Description
Self-contained, electric refrigerated floor model water cooler. Capacity of 50℉ drinking water, based upon 80℉ inlet water and 90℉ ambient.
This model furnished with hermetically sealed combination tank-tube type cooling unit enclosed in cabinet. Cabinet design allows for flush to wall installation.
Non-pressurized tank system is standard. Non-pressurized water tank is located after bubbler valve, so that tank is subject to line pressure only when valve button is pressed.
NO LEAD DESIGN
This water cooler complies with the lead-free
definition in the safe drinking water act of 1986 and lead contamination
control act of 1988.
Elkay Water Coolers are manufactured with a
waterway system utilizing copper components and completely lead-free
materials. These waterways have no lead because all lead materials, such
as leaded brass, have been removed. All joints are brazed using silver
solder only. No lead solder is permitted. A strainer with an easily
cleanable screen is provided to allow trapping and convenient removal of
waterborne particulate of 140 microns and larger prior to their entry
into the water cooler.
Cabinet: Cabinet wrapper supports fountain top and all working mechanisms. Stainless Steel cabinet available at extra cost.
Fountain Top: One piece stainless steel top, polished
to a uniform Elkay bright luster finish. Unique Swirl-Flo basin has an
integral vandal-resistant strainer, embossed bubbler pad.
Exclusive Flexi-Guard® Safety Bubbler: Innovative
design utilizes an infused anti-microbial pliable polyester elastomer to
prevent accidental mouth injuries. Flexes on impact, then returns to
original position. Strong. Abrasion-resistant. Anti-sweat. Keyed in
location to prevent rotation.
Color Selection: Models available in Light Gray Granite, Sandalwood and Stainless Steel panels.
- Adding an optional color may delay shipment 4 to 6 weeks
- As per manufacturer's policy, adding Sandalwood color cabinet makes the unit non-returnable
Protected by Elkay's 5 Year Limited Warranty on the refrigeration system of the unit.
Pressure-Type Water Coolers are designed to operate on 20 psi to 105
psi supply line pressure. If inlet pressure is above 105 psi, a pressure
regulator must be installed in the supply line. Any damage caused by
reason of connecting this product to supply line pressures lower than 20
psi or higher than 105 psi is not covered by the warranty.
Elkay FD7003-1Z Water Cooler Spec Sheet