Bobrick B-386 Partition-Mounted Dual-Sided Multi-Roll Toilet Tissue Dispenser
Holds four rolls of tissue, accommodates standard core toilet tissue rolls up to 5-1/8" (130mm) dia. 1500 sheet rolls, two each for compartment.
Cabinet — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. All-welded construction. Exposed surfaces have satin finish.
Flanges (2) — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn and beveled, one-piece, seamless
Toilet Tissue Dispensers (4) — 18-8 S, Type-304, 22 gauge (0.8mm) stainless steel with satin finish. Holds two standard-core
toilet tissue rolls up to 5-1/8" (130mm) diameter (1500 sheets) for each toilet compartment.
Spindles (4) — Chrome-plated plastic, equipped with heavy-duty internal springs.
Designer's Note: Theft-resistant spindles, which are removable only with special key provided. Order Part Number 283-604.
Unit holds four standard-core toilet tissue rolls up to 5-1/8" (130mm) diameter (1500 sheets), two for each compartment.
Spindles may be removed from each compartment for servicing.
Designers Note: It is recommended that one full toilet tissue roll remain wrapped until the other roll has been depleted to avoid
wasting ends of both rolls.
Mount unit, with seam in wrapper at bottom, in toilet partition 1/2" to 2" (13 to 50mm) thick, centered through a cutout
specially ordered from partition manufacturer or field cut. Dimensions of cutout are to be 11-1/2" wide x 10-7/8" high (290 x
275mm). For factory-made cutouts, location and size details should be furnished to partition manufacturer. For hollow-core
metal partitions, provide solid framing into which sheet-metal mounting screws can be secured.
For installation with sheet-metal screws furnished, place unit firmly in partition cutout, making certain that entire perimeter
of fixed flange is flush with and tight against partition surface. Secure to partition with screws through four mounting holes at
points indicated by an S. On other side of partition, position adjustable flange (which serves as an escutcheon) so mounting
holes are not in-line with mounting holes in fixed flange. Make certain entire perimeter of adjustable flange is flush with and
tight against partition surface before securing with sheet-metal screws furnished by manufacturer.
For through-bolting method of installation, make sure that mounting holes in adjustable flange are in-line with holes in fixed
flange. Using adjustable flange as template to mark locations, drill 9/32" or 5/16" (7 or 8mm) holes through partition. Provide
four binder posts and #6 (3.5mm) flat-head screws to secure unit and its adjustable flange. Obtain binder posts and screws by
ordering Bobrick Binder Post Kit No. 354-119 for partitions 1/2" (13mm) thick only or Kit No. 354-124 for partitions 3/4" to
1?1/4" (19 to 32mm) thick.
Note: Cutouts in Bobrick toilet partitions can be pre-cut for Bobrick partition-mounted accessories at factory if location and
size of cutouts are specified and the order for both partitions and accessories are received together.
Partition-mounted dual-sided multi-roll toilet tissue dispenser shall be type-304 stainless steel with all-welded construction;
exposed surfaces shall have satin finish. Flanges shall be drawn and beveled, one-piece, seamless construction. Unit shall
mount in toilet partition and shall serve two toilet compartments. Unit shall dispense four standard-core toilet tissue rolls up to
5-1/8" (130mm) diameter (1500 sheets). *Spindles shall be equipped with a heavy-duty internal spring.