BOBRICK B369Classic Series Recessed Paper Towel Dispenser / Waste Receptacle, satin finish stainless steel, seamless beveled flange, dispenses 350 c-fold or 475 multifold towels, knob-latch retains door, removable waste container has 2 gallon capacity. Rough wall opening 12-5/8" W, 26-5/8" H, 4" minimum depth (320 x 675 x 100 mm). Average mounting height 71" (1805 mm) to top of unit; barrier-free 51-1/2" (1310 mm).
Cabinet — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. All-welded construction. Exposed surfaces have satin finish.
Flange — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn and beveled, one-piece, seamless construction.
Door — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Secured to cabinet with a full-length stainless steel
piano-hinge. Equipped with a knob latch.
Paper Towel Dispenser — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Capacity: 350 C-fold or 475 multifold
Waste Receptacle — 18-8 S, type-304, Heavy-gauge stainless steel with satin finish. Top edges are hemmed for safe handling. Friction
catch. Capacity: 2 gal. (7.6 L).
Paper towel dispenser will dispense C-fold or multifold paper towels without adjustment. Rounded towel tray has hemmed opening to
dispense paper towels without tearing. Waste receptacle is retained in cabinet by a friction catch and is removable for ser vicing.
Provide framed rough wall opening 12-5/8" wide x 26-5/8" high (320 x 675mm). Minimum recessed depth required to finish face of wall is
4" (102mm). Allow clearance for construction features that may protrude into rough wall opening from opposite wall. Coordinate with
mechanical engineer to avoid pipes, vents, and conduits. If unit projects above top of wainscot, provide aluminum channel or other filler to
eliminate gap between flange and finish face of wall. Mount unit in wall opening with shims between framing and cabinet at all points
indicated by an S, then secure unit with sheet-metal screws furnished by manufacturer.
Recessed paper towel dispenser and waste receptacle shall be type-304 stainless steel with all-welded construction; exposed surfaces
shall have satin finish. Flange shall be drawn and beveled, one-piece, seamless construction. Door shall be secured to cabinet with a fulllength
stainless steel piano-hinge and equipped with a knob latch. Paper towel dispenser shall dispense 350 C-fold or 475 multifold paper
towels without adjustment or use of adapters. Removable stainless steel waste receptacle shall be retained in cabinet by a friction catch,
have top edges hemmed for safe handling, and shall have a minimum capacity of 2 gal. (7.6 L).