Satin-finish stainless steel. Equipped with tumbler lock. Spindles hold two 10" (255mm) dia. rolls with 2-1/4" (55mm) dia. core rolls; convertible for 3" (75mm) dia. core rolls. Sliding access panel exposes one roll at a time, allows easy roll change-over. Wide viewing slot in door; quick reloading. Patented.
Cabinet — 18-8 S, type-304, 20-gauge (1.0mm) stainless steel with satin finish. Equipped with a tumbler lock keyed like
other Bobrick washroom accessories.
Door — 18-8 S, type-304, 18-gauge (1.2mm) stainless steel with satin finish. Drawn, one-piece, seamless construction. Wide
viewing slot reveals toilet tissue supply inside cabinet.
Dispensing Mechanism — High-impact ABS.
Door unlocks with key provided and swings down for loading dispenser. Spindles accommodate two toilet tissue rolls up to
10" (255mm) diameter with 3" (75mm) diameter core, or remove outer spindle (which is held in place with 3 snaps) from the
inner spindles to accommodate 2-1/4" (55mm) diameter core rolls. Unique sliding access panel exposes one roll at a time for
patron use, assuring uninterrupted, complete no-waste use of first roll before starting the reserve roll; allows easy roll
change-over. When first roll is depleted, move the lever at the bottom of dispenser to the left until sliding access panel locks
in position and exposes roll on right. When door is opened for reloading, the sliding access panel automatically releases and
returns to the original position on the right. Move the remaining roll to the first position on left and install a new roll on the
right spindle. Wide viewing slot in door reveals the amount of toilet tissue on both rolls. Unit is designed for quick reloading.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. 2892-200 S/B, R/A Rev. 4/02 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2002 by Bobrick Washroom Equipment, Inc.
Mount unit on wall or toilet partition with four sheet-metal screws, furnished by manufacturer, at points indicated by an S.
Rear edge of unit should be 20" (510mm) from back wall. This locates toilet tissue within 12" (305mm) of front of standard
toilet that projects 30" (760mm) from back wall.
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with
sheet-metal screws furnished. For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal
screws furnished, or provide 1/4" (6mm) toggle bolts or expansion bolts.
For partitions with particle-board or other solid core, secure with sheet-metal screws or provide through-bolts, nuts, and
washers. For hollow-core metal partitions, provide solid backing into which sheet-metal screws can be secured. If two units
are installed back-to-back, then provide threaded sleeves and machine screws for the full thickness of partition.
Jumbo-roll toilet tissue dispenser door and cabinet shall be type-304 stainless steel with satin finish: door shall be 18 gauge
(1.2mm); cabinet shall be 20 gauge (1.0mm). Cabinet shall be equipped with a tumbler lock keyed like other Bobrick
washroom accessories. Door shall have a wide viewing slot to reveal toilet tissue supply inside cabinet. Dispensing
mechanism shall be constructed of high-impact ABS shall accommodate two toilet tissue rolls up to 10" (255mm) diameter
with 3" (75mm) diameter core; and be equipped with a sliding access panel that exposes one roll at a time. Spindles shall be
convertible in the field to dispense 2-1/4" (55mm) diameter core rolls by removing outer spindles furnished in-place.