ASI-7311-24B
Surface Mounted Towel Shelf with Drying Rod shall be fabricated of stainless steel alloy 18-8, type 304. Wall mounting plates shall be formed for strength with dimpled mounting holes. Cross tubes shall be 3/8" diameter (Ø10mm) and shall be held in receiver holes in continuous 3/4" diameter (Ø19mm) formed mounting frame mechanically retained in wall plates. Drying rod below shelf shall be 3/4" diameter (Ø19mm) formed tube mechanically retained in wall plates. This shelf is 24" in length.
ASI 7311 Towel Shelf Spec Sheet
