SPEEDFLOW HAND DRYER, Automatic, Polished Stainless Steel Cover, FAST DRYING


		Hand dryer SPEEDFLOW: Finally high Speed at a competitive price! - Dries hands in 10-15 seconds. - Universal Voltage out of the box. Voltage range from 110 to 240 V. - Protrudes less than 4 inches from the wall in compliance with ADA requirements. - High speed motor can be adjusted manually to reduce noise levels. - Available in most popular coves and finishes. Vandal-resistant. - Great for renovation projects - Screw holes match most holes from other popular models. - 10 year limited warranty. Green Spec applied.

Manufacturer:	SANIFLOW
Model #:	M06AC
Cover:	Stainless Steel Bright Chromed
Spec:	Click Here

General Description
SPEEDFLOW AUTOMATIC hand dryer is designed to last incorporating a vandal resistant design that include a Stainless Steel one-piece satin finish, 1/16" thick cover with 2 vandal-proof locks screws and lock with special Speedflow wrench.
• Warm air hand dryer.
• Surface mounted and conforms to ADAAG projection.
• Universal voltage
• Maximum robustness and vandal-proof.
• Suitable for very high traffic facilities.
• Normally goes along with a soap dispenser.

Components & Materials
• Stainless steel one-piece cover bright finish, 1/16” thick. Cover fixed to the base by means of 2 vandal-proof lock screws and lock with special Speedflow® wrench.
• Aluminium base, with 4 Ø 5/16” holes for wall mounting. It includes silent-blocks to damp mechanical vibrations.
• Fire resistant plastic UL 94-V0 fan scroll
• High speed motor. Universal brush motor, 3.800-8.200 rpm, A class. RPM may be adjusted manually by means of a potentiometer. The motor includes a safety thermal cut-off.
• Aluminium centrifugal double asymmetrical inlet fan wheel.
• Waved wire NiCr heating element mounted on a mica frame that incorporates a self-resetable thermal cut-off at 302 ºF which disconnect the whole appliance.
• Automatic disconnection system after 60 seconds of continuous use.
• Fully adjustable (2” – 8”) IR electronic detection sensor by means of a potentiometer.
• Sensors come with a polycarbonate viewing window.

Operation
Place the hands under the air outflow valve. The dryer will start automatically, and go on with no interruption as long as the hands are kept in the detection range of the sensor. The appliance will stop 2 seconds after the hands are removed from the airflow.
Place the hands under the air outflow valve. The dryer will start automatically, and go on with no interruption as long as the hands are kept in the detection range of the sensor. The appliance will stop 2 seconds after the hands are removed from the airflow.

Certificates
UL comply with UL499 norm, and eñectrical safety for the UE.

Technical Characteristics

Voltage:		100-120 V, 208 V, 220-240 V
Power consumption:		17.9 A (120 V)
Motor:		1/3 HP
R.P.M.:		4.200 – 8.200
Heating element:		900 W (450 + 450 W)
Effective airflow:		36-58 CFM
Free airflow:		43-70 CFM
Noise level at 79''.:		64-70 dB
Air speed:		4.920- 9.840 LFM
Temperature (at 4'' distance / 70ºF):		106-111 ºF
Insulation:		Grounding required
Frequency:		50/60 Hz.
Drying time:		10-15 sec
Montaje:		ADA Surfaced mounted
Size:		11-1/2” x 10-1/2” x 4”
Weight:		7,9 Lbs.

Specification
Surface mounted and ADA compliant vandal resistant hand dryer shall be manufactured with one-piece high quality 1/16” thick stainless steel cover, bright finish and fixed to the base by means of 2 vandal-proof lock screws and lock with special Speedflow® wrench. The dryer should be an universal voltage unit. The back base shall be aluminium and with 4 holes Ø 5/16” for wall mounting, including silent-blocks to damp mechanical vibrations. The dryer shall be activated through an infrared electronic sensor and shall automatically turn off two second after hands are removed. Sensor shall have a polycarbonate viewing window and the detection distance can be regulated from 2” to 8”. High speed universal brush motor should be 1/3 HP, 3.800-8200 rpm, A class. The RPM could be adjusted manually by means of a potentiometer. The motor includes a safety thermal cut-off. The Waved wire NiCr heating element should incorporate a self-resetable thermal cut-off which will disconnect at 302 ºF. The hand dryer should have an aluminium asymmetrical double inlet fan wheel, and the fan scroll shall be made of a fire resistant plastic UL 94-V0. Airflow could be adjusted from 43 to 70 CFM with an air temperature from 103 to 111 ºF and with and air velocity from 4.920 to 9.840 LFM during user controlled drying cycle. The dryer shall have a total power of 1.150 watts with a consumption of 9.5 A (at 120 V). Noise level should be 64-74 dB at 79” distances. Protection level against water splashes should be rating IP23. Overall dimensions shall be 11-1/2” x 10-1/2” x 4”. Unit shall VDE approved and CE marked and comply with electrical safety directives 73/23/CEE& 93/68/CEE and electro-magnetic compatibility directives 89/336/CEE & 92/31/CEE and with ADA projection requirements.

Surface mounted hand dryer shall be Model M06AC-UL sensor operated, stainless steel bright finish, manufactured by Saniflow Corporation, 12800 N.W. 38 Avenue Miami, Florida 33054-4525.