* FREE SHIPPING * On All Hand Dryers and Over 3,500 Restroom, Janitorial, and Industrial Products (Contiguous United States)
Free Shipping to lower 48 states
General Description
· Liquid soap dispenser, wall mounted. · Push-button operated. · Robust and vandal-resistant. · Suitable for high traffic facilities. · Model suitable for public use. · It normally goes along with a warm air hand dryer.
Components & Materials
· Stainless steel AISI 304 body, top filling lid and push-button, 22-gauge (0.8 mm), bright finish.
· It is mounted on the wall by means of 4 wood screws with their corresponding 3/16” (5 mm) wall plugs (the lower ones attach the dispenser, while the upper ones fix it to the wall) (screws and wall plugs are provided).
· Anti-dripping and anti-corrosion valve. Design based on a polyamide piston with 2 elastomeric toroidal gaskets, silicone blocking pivot and stainless steel ball to ensure tightness.
· Thermoplastic container, 1/8” (3 mm) thick. Access to its interior using a standard mediclinics ® key supplied.
· Stainless steel AISI 302 springs.
· Housing with 1 viewing slot.
Operation
Press push-button manually to dispense a measured amount of liquid soap. Valve is operable with one hand, without tight grasping, pinching, or twisting of the wrist.
Designer’s note: Do not use E4-rated antibacterial soaps (active ingredients PCMX or Triclosan), iodine-based surgical soaps, or alcohol-based antiseptic solutions in this unit. Soap valve is not designed to dispense these types of corrosive soaps.
Technical Characteristics
Liquid soap: All except for surgical soaps
Installation height: 6” - 8” from shelf
Quantity dispensed per pulsation: 0.033 - 0.04 Oz
Capacity: 37.2 Oz
Container: Thermoplastic
Operable force: 26 N
Push-button: Stainless steel
Montaje: Surface
Size: 4-5/8”W x 8-1/8”H x 4-5/8”D
Weight: 2.2 Lbs
Specification
Wall mounted soap dispenser, robust and vandal-resistant with a body, top-filling lid and push-button made of stainless steel AISI 304, 22-gauge (0.8 mm), bright finish. It shall be mounted on the wall by means of 4 wood screws with their corresponding 3/16” (5 mm) wall plugs; the lower ones attach the dispenser, while the upper ones fix it to the wall. The dispenser shall include an anti-dripping and anti-corrosion valve, which is based on a polyamide piston with 2 elastomeric toroidal gaskets, silicone blocking pivot and stainless steel ball to ensure tightness. The thermoplastic container shall be 1/8” (3 mm) thick and the access to its interior shall be using a standard saniflow ® key supplied. The dispenser shall be provided with stainless steel AISI 302 springs and housing with 1 viewing slot. The soap dispenser shall be suitable for commercially marketed all purpose liquid and lotion hand soaps and synthetic detergents except for E4-rated antibacterial soaps (active ingredients PCMX or Triclosan), iodine-based surgical soaps, or alcohol-based antiseptic solutions. Overall dimensions shall be 4-5/8”W x 8-1/8”H x 4-5/8”D.
Liquid soap dispenser shall be model DJ0030C, stainless steel AISI 304 bright finish, of Saniflow Corp., 12800 N.W. 38 Avenue Miami, Florida 33054-4525.
ProDryers
ProRestrooms
ProDrinkingFountains
ProFloorMachines
HandDryerDistributor
advanced search >> view cart >> checkout >> amount in cart:
$0.00
lost your password?
* FREE SHIPPING * On All 